Xxembedded.com”target=”_blank”rel=”external”title=”embedded” >embedded, Inc. a XycomVME, Inc. Company has announced the XCPC-9100 CompactPCI carrier board with an eight port 10/100/1000Mbps Ethernet switch.

The XCPC-9100 is a full hot swap capable PMC carrier board that can hold up to two PrPMC (PMC processor module) or PMC modules with front or rear-panel I/O support in a single 6U CompactPCI slot. The two PrPMC sites can be configured as Monarch or Non-Monarch sites with bus mastering and 3.3V or 5V signaling.

The XCPC-9100 also includes an on-board micro-controller for programming the Broadcom BCM5398, 10/100/1000Mbps Ethernet switch and the IPMI controller for reporting module health and FRU. The on-board 8-port 10/100/1000Mbps Ethernet switch routes the two channels of PrPMC 10/100/1000Mbps Ethernet lines from each PMC site, the two 10/100/1000Mbps Ethernet lines for PICMG 2.16 and two 10/100/1000Mbps Ethernet ports out the front of the module allowing the maximum flexibility in Ethernet conductivity. The XCPC-9100 can be setup for port based VLAN giving a very powerful module for many applications.

Typical applications for the XCPC-9100 with the XPMC-6710 are many. Add a FPGA PMC in the second PMC site for an intelligent I/O module, FFT engine, or in a switch fabric matrix of multiple or cascade processing engines. The VLAN capabilities of the XCPC-9100 allow for a segmented Ethernet system to optimize the though put of a team/project system.

Also see our XPMC-6710 PrPMC module to configure a complete dual 7448 PowerPC processor array in a single slot on the CompactPCI bus. The XPMC-6710 PrPMC module is well suited for use with the XCPC-9100.

Xembedded, Inc. (A XycomVME, Inc. company) is recognized worldwide as a leading supplier of Embedded open architecture solutions. Headquartered in Saline, Michigan, Xembedded has over 35 years of experience supplying embedded computer products to the OEM,
Homeland Security, Medical, Industrial Automation, Power Generation, Aerospace and Military markets. With over 650,000 systems installed in more than 50 countries, the company’s hardware and software offerings are considered some of the highest quality and most reliable
systems available.

The XVME-690 VMEbus Processor board is feature rich with everything needed for the most demanding applications. The board features the ability to put all of the I/O out the rear of the board using our XVME-990 rear transition module. The board can be used for those applications requiring “headless” operation using the serial port, in console mode. The XVME-690 is being offered in a RoHS compliant version but a standard “leaded” version is also available. The board is available in both standard and extended temperature ranges. The XVME-690 has the following features; Pentium ® M 1.8GHz or Celeron ® M 1.5GHz. with memory configurations of 256MB, 512MB, 1GB or 2GB of 333MHz DDR ECC memory. The PMC site is 64-bit, 66MHz PCI-X PMC site w/optional rear I/O, 3.3V. For communications the XVME-690 offers Dual 10/100/1000Mbps Ethernet and or Vita 31.1 with three serial ports, one can be configured for RS-422/485 and a Printer port out P2. The module has three USB 2.0 ports, two SATA-150 ports, two EIDE ports out the P2 and Stereo Sound with input and output channels. An option for on-board storage can use an optional on-board 1.8” hard drive or Compact Flash site all within a 4hp single slot.

If more expansion is required beyond the on-board PMC site, the XVME-690 can use the XVME-976-209 dual PMC site carrier board. XycomVME provides a robust software support library for all popular operating systems with built-in applications to get you up and running quickly. XycomVME has always offered one-stop shopping for processor and I/O modules and has become a single source for data acquisition and control products and support. XycomVME’s approach in their development has resulted in the elimination of classic hardware/software finger pointing.

XycomVME is recognized worldwide as a leading supplier of xembedded.com”target=”_blank”rel=”external”title=”embedded” >Embedded open architecture solutions. Headquartered in Saline, Michigan, XycomVME has over 35 years of experience supplying embedded computer products to the OEM, Homeland Security, Medical, Industrial Automation, Power Generation, Aerospace and Military markets. With over 350,000 systems installed in more than 50 countries, the company’s hardware and software offerings are considered some of the highest quality and most reliable systems available.

Saline, Michigan – April 2, 2007 –Xembedded, Inc. (A XycomVME, Inc. company)

“The Real-Time software products from Ardence are the products our customers are looking for to solve their application needs” stated John Sayer VP of New Product Development for Xembedded (a XycomVME, inc. company).

Xembedded, Inc. (a XycomVME, inc. company) has had a long relationship with Ardence. The complete Xembedded processor family is supported to run RTX software. “Our Windows NT Embedded software support library was just the start of our relationship with Ardence, this tradition is renewed with the release of our software support library for Windows XT Embedded” stated John Sayer.

The RTX support is available on all of our Intel based processors for VMEbus on the XVME-661, XVME-690, XVME-6200 and CompactPCI XCPC-6200. These products can be found on our web site at www.Xembedded.com.

Xembedded, Inc.(A XycomVME, Inc. company) is recognized worldwide as a leading upplier of Embedded open architecture solutions. Headquartered in Saline, Michigan, Xembedded has over 35 years of experience supplying embedded computer products to the OEM, Homeland Security, Medical, Industrial Automation, Power Generation, Aerospace and Military markets. With over 350,000 systems installed in more than 50 countries, the company’s hardware and software offerings are considered some of the highest quality and most reliable systems available.

CompactPCI PrPMC Carrier with Eight port Switch

The XCPC-9100 has two PrPMC sites an on-board 8-port switch, PICMG 2.16, 2 front Ethernet & IPMI

XCPC-9100

PMC Frame Grabber With Live Video Capability

Frame grabber, suited for many apps capable of incorporating live video within a graphics window.

XPMC-3320

PMC Video Mixer

The XPMC-3325 Real-time and Image acquisition video controller with external video input for camera.

XPMC-3325

PowerPC 7448 PrPMC Module

The XPMC-6710 provides a 7448 PowerPC on a PMC module with two Ethernet ports

XPMC-6710

Core™ 2 Duo® VMEbus Processor

The XVME-6200 processor provides PMC/XMC site, two Gigabit Ethernet, Vita 31.1 SATA, EIDE.

XVME-6200

VMEbus Processor with Dual PMC/PrPMC Sites

Add our XVME-6710 module to turn the XVME-6520 into a power house of dual PC processing power.

XVME-6520

XPC-9100

XCPC-9100 is a full hot swap capable mez- zanine carrier board that can hold up to 2 PMC modules with front or rear-panel I/O support in single 6U CompactPCI slot. The XCPC-9100 can accept two PrPMC (PMC processor module) with one configured as Monarch and the other as Non-Monarch. The XCPC-9100 also includes on-board IPMI controller.

XPMC-3320

The XPMC-3320 is a versatile frame grabber, well suited for many applications and is capable of incorporating a live video window within a graphics window.

The flexible image acquisition and analog camera interface gives it great flexibility to acquire all types of images from many different sensors. When combined with the video outputs and graphic overlay capabilities, the XPMC-3320 affords systems engineer’s great flexibility over a wide range of applications using the same platform.

XPMC–3325

The XPMC–3325 Video extender PMC is an all digital solution for real time video and image acquisition. It also incorporates strong processing and display circuits for accelerated MPEG-2 compression and decompression for transmission of high resolution digital images over low bandwidth carriers. Display can be configured for multi overlay, real time windowing and multi display. Night vision options are also available in some modes.

The XPMC-3325 comes with a large library of software calls for manipulating images and video streams with data infusions and overlay development. This Video Controller supports both Solaris and Linux Operating systems.

XPMC-6710

Xembedded, Inc. offers the XPMC-6710 a PrPMC (Processor PCI Mezzanine Card) with a high performance PowerPC® 7448 processor which is the fastest PPC in its class. The XPMC-6710 offers advantages over other solutions due to its flexibility to update the CPU at ease while maintaining the rest of the subsystem I/O. The XPMC-6710 is well suited for applications requiring additional processing power! When used with our XVME-6520 7448 Power PC VME processor module or our XCPC-9100 CompactPCI dual PMC carrier board. The XPMC-6710 works well for applications such as communication, Defense/Aerospace, Industrial controls, DSP, etc.

XVME-6200

The XVME-6200 is a powerful VMEbus PC compatible processor module from Xembedded, the pioneer and leader in VMEbus PC technology.

The XVME-6200 VMEbus processor integrates an Intel® Core™ Duo or Core™ 2 Duo processor running in a range of 1.50GHz to 2.0 GHz with a PCI-to-VMEbus interface. This VME processor module allows users to take advantage of the powerful multiprocessing capability of the VMEbus while using standard off-the-shelf PC software, operating systems and VMEbus I/O modules.

XVME-6520

The Xembedded XVME-6520 is ideal for systems designers choosing commercial-off-the-shelf (COTS) products to achieve substantial cost savings and a reduced time-to-market.

Need more processing power? Add our XVME-6710 PMC Processor module turning the XVME-6520 into a power house of dual Power PC processing power.

The Xembedded XVME-6520 board has two 64-bit PMC/PrPMC sites for hosting the Xembedded XPMC-6710 PrPMC,FPGA, signal conditioning modules, peripherals such as video, MIL-STD-1553B or storage.